Kyocera TASKalfa 7002i Service Manual page 448

16. Refit the scanner wire drum with two-
screws.
17. Detach the scanner wire stoppers and
the frame securing tools.
18. Focusing on the locating ball of the wire
drum, align the scanner wires to the
inside.
19. Move the mirror frame B(b) from side to
side to correctly locate the wires in posi-
tion.
20. Refit the mirror frame A (a) in the main
unit.
21. Move the mirror frames A (a) and the
mirror frames B (b) to the machine left,
and insert two frame securing tools (d)
into the positioning holes (c) at the front
and rear of the scanner unit to secure
the mirror frame A (a) and the mirror
frame B (b) in position.
22. Attach the front wire holder plate (e)
and rear wire holder plate (f) to the mir-
ror frame A (a) with each screw (g)
while holding the wire (h) with the
plates.
23. Detach the frame securing tools (d).
24. Reattach the lamp unit in the original
position.
g
e
d
c
a
b
Figure 4-180
4-120
2WA/2NJ/2RK
d
g
f
b
a
h
h
c
h
14j0264