Kyocera TASKalfa 7002i Service Manual page 327

3. Loosen two screws (b) securing the
adjuster plate (a) and move it.
*: Raise the adjuster plate to decrease the
width B and lower the adjuster to increase
the width.
Scale: 1mm)
*: When adjusting, fix it where the left and
right scale are equal in Refer ence to the
scale (c).
Shipment setting position
Metric : A4 (d)
Inch : LT (e)
*: A4 and LT punch marks are at the
machine rear side only.
*:
Treatment 2
Change the setting values in U246 [Setting:
Three Fold] to shift the tri-folding position (a)
and to change the width A and C. (Width of B
remains unchanged.)
Raise the set value to align the tri-folding to the
left.
Lower the set value to align the tri-folding to
the right.
b
Figure 3-107
B
A
C
Left
a
Figure 3-108
3-113
2WA/2NJ/2RK
b
a
e
d
A
C
Right
a