Kyocera TASKalfa 7002i Service Manual page 432

26. Remove four screws (a)(A to D) and
remove the LSU (b).
27. Check or replace the LSU (b) and then
reattach the parts in the original posi-
tion.
*: To re-mount the LSU (b), secure the-
screws in the order of A – B – C- D.
28. Execute the following procedures when replacing the LSU to the new unit.
(1) Execute maintenance mode U119 (Drum setup). (Refer P.6-83)
(2) Execute maintenance mode U464 (Calibration). (Refer P.6-189)
(3) Execute maintenance mode U412 (Uneven density adjustment). (Refer P.6-178)
(4) Execute maintenance mode U464 (Calibration). (Refer P.6-189)
(5) Execute maintenance mode U410 (Auto halftone adjustment). (Refer P.6-170)
a(D)
a(A)
Figure 4-153
4-104
2WA/2NJ/2RK
a(C)
b
a(B)