Kyocera TASKalfa 7002i Service Manual page 413

9. Remove the screw (a)(M4x8).
10. Release two hooks (c) using a flat blade
screwdriver (b) and remove the right
middle rear cover (d).
(1-9) Detaching and reattaching the IH PWB cover and IH wire cover
Procedures
1. Remove the right middle rear cover.
2. Remove four screws (a)(M3x8) and
then remove the IH PWB cover (b).
3. Remove the IH wire cover (c).
d
Figure 4-121
Figure 4-122
4-85
2WA/2NJ/2RK
a
a
c
b
c
b
d
14j0217
c
a
b
14j0218