Kyocera TASKalfa 7002i Service Manual page 343

9. Release two hooks (a) and remove the
cover (b).
10. Release the hook (a) and remove the
PF separation pulley (b)(left) from the
shaft.
11. Clean or replace the PF forwarding pul-
ley (left), PF paper feed pulley (left) and
PF separation pulley (left).
12. Reattach the PF forwarding pulley (left),
PF paper feed pulley (left) and PF sepa-
ration pulley (left) in the original position
of the primary paper feed unit.
*: Attach them while checking the color of
the collar.
PF forwarding pulley (left) (Collar:
white)
PF paper feed pulley (left) (Collar:
white)
PF separation pulley (left) (Collar:
black)
a
b
4-15
2WA/2NJ/2RK
a
b
Figure 4-13
Figure 4-14