10. Remove the stop ring A (a) and then
remove the one way clutch (b) and PF
paper feed pulley (c).
11. Remove the stop ring B (d) and then
remove the PF forwarding pulley (e).
12. Remove the stop ring (a).
13. While pressing the retard release lever
(b), remove the PF separation pulley
(c).
14. Clean or replace the PF forwarding pul-
ley, PF paper feed pulley and PF sepa-
ration pulley.
15. Reattach the PF forwarding pulley, PF
paper feed pulley and PF separation
pulley in the original position of the PF
primary paper feed unit.
c
a
4-57
2WA/2NJ/2RK
c
b
e
d
Figure 4-75
d
Figure 4-76
a
14j0096
b
14j0097