Memory Motherboard (Mmb); Figure 5-13 Removing And Replacing A Memory Motherboard (Mmb) - Compaq ES40CSLP Installation, User & Service Manual

Removal and Replacement

5.14 Memory Motherboard (MMB)

Perform the following procedure to remove a memory motherboard:
1. Extend the chassis for service (see Section 5.2).
2. Remove the top cover (see Section 5.4).
3. Put on an antistatic wriststrap.
_____________________________Caution__________________________
An antistatic wriststrap must be worn when handling any module to prevent
damage to the module.
______________________________________________________________
4. Pull up on the module levers
Figure 5-13).
5. Pull the MMB straight up out of its slot (see Figure 5-13).
To replace the memory motherboard, refer to Figure 5-13 and reverse steps 1 through 5 of the
removal procedure. Refer to Section 5.15 to remove the memory DIMMs from the MMB being
replaced and install them on the new MMB.

Figure 5-13 Removing and Replacing a Memory Motherboard (MMB)

5–16 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
c
located on each end of the MMB
1
1
2
š
being removed (see
LJ-06651