Extending The Chassis For Service; Figure 5-1 Extending The Chassis For Service - Compaq ES40CSLP Installation, User & Service Manual

5.2 Extending the Chassis for Service

___________________________ WARNING _________________________
Before extending the chassis for service, ensure that the cabinet is stable and
that all provided stabilizing features have been activated. The stabilizing
features for the rack or cabinet are configuration dependent.
______________________________________________________________
___________________________ ACHTUNG _________________________
Bevor das Gehäuse für die Wartung erweitert wird, sollten Sie sicherstellen,
daß es stabil ist und alle verfügbaren Stabilisierungsfunktionen eingeschaltet
sind. Die Stabilisierungsfunktionen für das Gestell oder Gehäuse hängen von
der jeweiligen Konfiguration ab.
______________________________________________________________
Perform the following procedure to extend ES40CSLP rackmount system chassis for service:
1. Extend the stabilizing legs at the front of the cabinet (if stabilizing legs are provided).
2. Loosen the four captive screws
5-1).
____________________________ Caution __________________________
Check and ensure that all cables are free to follow the chassis before extending the
chassis.
______________________________________________________________
3. Carefully pull the chassis forward until the slides lock in the extended position.
To secure the chassis in the cabinet, press up on the left and right slide locks
steps 1 through 3 of the extension procedure.

Figure 5-1 Extending the Chassis for Service

2
1
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 5–3
Removal and Replacement
c
that secure the front panel to the front rails (see Figure
AE-00079
š
, and reverse