Ricoh MP C6502SP Field Service Manual page 248

2. Installation
28. Attach the cable clamp [A] provided with the copy tray to the main machine. Then route the
harness as shown below. (
29. D135/D136 only: Connect the interface cable of the cooling unit to the interface [A] whose cover
you removed in Step 23.
• If you leave this connector unconnected, SC534-02 (Duplex Exhaust Fan/Rear Lock) occurs.
30. Turn the machine main power switch ON.
31. Set SP1-907-001 (Exit Tray Full Detection) to "1: ON".
• The default setting of this SP is "0: OFF". It must be set to "1: ON" in order for tray full
detection to work.
32. Attach the decal [A] to the left side of the main machine.
246
x 1)