2. Installation
• There are four cutouts in the sheet.
• Align the left-most cutout with the corner [A] of the paper exit.
5. Attach the paper height sensor [A] and harness clamp [B] to the sensor bracket [C].
6. Attach the actuator [F] to the actuator arm bracket [D].
7. Attach the actuator bracket [D] to the sensor bracket [C]. ( x 1; M3 x 6)
8. Connect the sensor harness [E] to the sensor bracket [A]. (
9. Attach the sensor bracket [C] to the main machine. ( x 2; M4 x 8)
236
x 1,
x 1)