92 30 19 Removing and installing rear window wiper
system
Removing rear window wiper system
Installing rear window wiper system
top of page
Removing rear window wiper system
Note
The rubber seal of the rear wiper arm remains in the rear centre panel; do not remove!
•
•
The relay can be unclipped and removed with the wiper motor installed!
1. Remove cover over rear−window wiper arm.
2. Undo the hexagon nut and pull off the rear−window wiper arm.
3. Remove the rear panel cover in front of the rear−window wiper motor.
4. Undo the retaining frame with rear−window wiper motor at the rear centre panel −(2 nuts, 1 screw)− and
pull out to the front.
5. Disconnect the electrical plug connection.
top of page
Installing rear window wiper system
Note
•
The spoiler edge on the rear−window wiper blade must face outwards!
Tightening torque: Hexagon nuts M6: 8 Nm (6 ftlb.)
Tightening torque: Hexagon−head bolt M6: 8 Nm (6 ftlb.)
Tightening torque: Wiper arm − nut M8: 17 Nm (12.5 ftlb.)
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
92 30 19 Removing and installing rear window wiper system
1114