Table of Contents
Advertisement
Installing the 201i server in the Avaya Communication Server 1000 system
What is next?
Continue with
Replacing the Media Gateway or Media Gateway Expansion
cover
Introduction
This section describes how to replace the front bezel and inside front cover plate on the Media
Gateway or Media Gateway Expansion.
To replace the inside front cover plate
The following diagram provides an overview of how to install the inside front cover plate:
®
88
Avaya CallPilot
201i Server Hardware Installation
For instructions, see the appropriate procedure in
Media Gateway Expansion cover
Connecting cables to the Communication Server 1000 system
Replacing the Media Gateway or
on page 88.
on page 91.
December 2010
Advertisement
Table of Contents
