Table of Contents
Advertisement
Operation
End of Order (Automatic / Manual)
The orders are completed by end of order. The
sorter moves so that the prints are separated in
the buckets according to the orders.
When a negative / slide is scanned or a digital
image file is loaded after end of order, this new
order has to get a new order number either
automatically or manually.
Special cases:
– The sorter moves on without an end of order if
an order exceeds the capacity of one bucket.
– Splices in the paper rolls are cut separately and
the respective pieces of paper are deposited in
the print order stack.
Automatic end of order occurs:
– When a film (film strip) of a certain length is
moved out by the film drive (Autoprint)
– When the user changes to another print mode
– Film carrier change
– When the film stop key (STOP) is pressed on
the machine
– When the film stop key is pressed on the
screen
Touch the End of order button to trigger a
manual end of order. This is required:
– In the Print modes Manual positioning and
Slide print
– After automatic end of order has been
deselected
– For film strips shorter than the minimum length
during or after the handling of the last strip
AGFA d-lab.3
2003-06-01 /PN 9008
Production
6.13
Advertisement
Table of Contents
