Table of Contents
Advertisement
Operation
Network orders
These parameters allow automatic printing of
network orders in print breaks (no activities by the
operator within a certain adjustable time). The
machine automatically switches to the print mode
Network orders and prints the orders waiting
there.
Automatic printing On/Off
–
Time span without operator action after which
–
the pop-up for Network order is to be displayed
(5 minutes are preset).
Duration of the pop-up display after which
–
the printing of digital orders is started
automatically if no operator action takes place
(1 minute is preset).
PDM (e.g. d-workflow)
Information about the PC (PDM Server) on which
the PDM Software is installed (required for
network orders):
Address or name
–
Name or IP address
Port no. (Standard is 5001 or pfdmcom, if the
–
corresponding input in the SERVICES file
exists)
Explanation:
PFDF (Photofinishing Data Format) is a
standardized format for order data to be used in
networks.
The PDM (PFDF Data Manager) manages the
order files. It saves digital orders (images and
PFDF information) until they are called by a
receiving station, e.g. the d-lab.2.
In network connections with several input devices,
the d-workflow should be installed on a PC that is
only responsible for this task (prerequisites: 32-Bit
Windows PC, operating system Windows 2000, at
least 700 MHz, at least 128 MB RAM, at least 20
GByte hard disk).
For information about the current PDM Software,
e.g. d-workflow, please contact the Service.
AGFA d-lab.3
2003-06-01 /PN 9008
Settings
040
dwork
4.47
Advertisement
Table of Contents
