Table of Contents
Advertisement
Production
Printing File Prints with Preview
– Preview is activated
With active preview a large number of functions
is offered for image correction and image
enhancement. The edited images can be saved
on data carriers.
– Touch Start print:
Up to 4 images are shown at the same time,
the corrections of the selected configuration are
taken into consideration. The operator can
modify these corrections for each individual
image in the display. Information about the
current configuration is shown on the side of
the buttons.
For capacity reasons, the images in the display
have much fewer pixels than the print later on.
Lack of sharpness is therefore difficult to
discover in the preview.
The preview continues automatically at the
preset speed. If the active image (on the
extreme right) advances without operator
action, it is printed with the preset configuration.
– The operator can stop the automatic cycle by
pressing Stop in order to edit the active image.
– Color / density corrections can be entered
directly in the preview with 4 images as of
Software Version 7.5.
– Enlarged view on
The current frame is shown twice for
comparison:
− Original (small)
− Edited version (enlarged):
In case of modifications, the display is
refreshed with the function Image editing
or Specially.
– Rotate display
To show an enlarged picture upright (always by
90° cw).
– Enlarged view off returns to the normal view
of the 4 images
6.48
2003-06-01 /PN 9008
Operation
046
019
AGFA d-lab.3
Advertisement
Table of Contents
