Table of Contents
Advertisement
Operation
General Machine
The d-lab encompasses 4 major components:
1. Main Computer (separate, but integrated into
the scanner housing) to control the general
work process and generate the image exposure
data. The monitor for the operation of the
machine is also connected to the Main
Computer.
2. Scanner to digitize negatives and slides and
determine corrections and exposure values.
3. Printer to prepare and transport the paper size
to be printed and to print the digital image on
paper by means of a laser. Special laser paper
is required to obtain optimum results.
4. Paper Processor with a connected sorter and a
deposit tray for the prints.
1 Print engine with laser fiber and laser module
2 Touch Screen
3 Film feeder with a cleaning brush
4 Film carrier, Scanner
5a Scanner lamp
5b Filter wheel
6 Film take-up
7 Wet section with racks, crossovers, chemical filters
8 Built-in densitometer
9 Dryer
AGFA d-lab.3
10
Order sorter
11
Main switch, GFI switch
12
Drain taps for the chemical overflow
13
RH paper magazine
14
Lane distributor
15
Lens / CCD
16
Transport unit
17
Film collecting box
18
LH paper magazine
2003-06-01 /PN 9008
Overview
dlabr180
dlabr187
2.1
Advertisement
Table of Contents
