Table of Contents
Advertisement
Operation
Autoprint with Preview
– Preview is active
– Inserting a film / film strip:
The film is pulled in, scanned and positioned on
the first negative. Up to 4 images are shown at
the same time, the corrections of the selected
configuration are taken into consideration. The
operator can modify these corrections for each
individual image in the display. Information
about the current configuration is shown on the
side of the buttons.
For capacity reasons, the images in the display
have much fewer pixels than the print later on.
Lack of sharpness is therefore difficult to
discover in the preview.
The preview continues automatically at the
preset speed. If the active image (on the
extreme right) advances without operator
action, it is printed with the preset configuration.
– The operator can stop the automatic cycle by
pressing Stop in order to edit the active image.
– Color / density corrections can be entered
directly in the preview with 4 images as of
Software Version 7.5.
– Enlarged view on
The current frame is shown twice for
comparison:
− Original (small)
− Edited version (enlarged):
In case of modifications, the preview is
refreshed immediately with the functions
Image editing or Specially.
– Rotate display
To show an enlarged picture upright (always by
90° cw).
– Enlarged view off returns to the normal view
of the 4 images
All further buttons are displayed in the preview
with 4 images as well as in the enlarged view.
Explanations of these buttons follows on the next
page.
AGFA d-lab.3
2003-06-01 /PN 9008
Production
010
019
6.29
Advertisement
Table of Contents
