Table of Contents
Advertisement
Deviations from normal Operation
If the screen remains grey for more than 3 minutes upon a Reset
− Push the ON key
In case of Image Processing Errors
It may happen that several images cannot be
printed, but only the last image is shown.
− Touch Clear
Types of adjustment for file print:
− Fill Print
Center crop; image information getting lost
− Fit image to paper
The whole image remains unchanged, a bor-
der is added.
If Fill Print is selected, the aspect ratio of the
frame must almost correspond to that of the print
size. In case of larger differences, the error
message Parameter range violation is dis-
played. The image can then only be exposed
with Fit image to paper.
In case of Paper Processor Errors
Some errors cause the Printer to stop. If paper is
still in the transport area of the Printer, it must be
removed before the work can be continued.
If an error occurs during a Reset, a message
appears telling that there are unrepaired errors.
These active errors must be cleared from the er-
ror list. Deactivate the option Show all errors so
that only active errors are displayed.
Then perform a Reset.
7.6
2003-06-01 /PN 9008
Operation
022_dp
AGFA d-lab.3
Advertisement
Table of Contents
