Digital Orders, Settings - AGFA d-lab.3 Technical Documentation Manual

Settings

Digital Orders, Settings

Remote order File print / Autosave
The access to the indicated drive / directory of the
external PC must be possible without restrictions
(no password protection!).
Enter Computer Name and Resource Name
without "\".
Call up:
–
Settings
Machine settings
Network orders
Remote order File print
Defines an external storage location within the
network where image files for the File print /
Remote order print mode are stored and
accessible for the machine
(Access via
When File print / Remote orders is started the
machine automatically connects to the specified
computer / drive.
Computer name: Enter the name or the IP
–
address of a Workstation in the network.
Resource name
–
A shared folder on the specific computer.
The folder must be shared on the PC where
–
folder is located. Password protection must
not be activated.
Enter the enable name as Resource name
–
on the machine, the actual name of the
folder is not used.
Remote order Autosave
Defines an external storage location within the
network, where to the machine copies and saves
the image files if the Autosave function is
activated.
Computer name
–
see above: Remote order File print
Resource name
–
see above: Remote order File print
4.46
2003-06-01 /PN 9008
).
Operation
040
AGFA d-lab.3