Table of Contents
Advertisement
Operation
When the magazine is in place, the machine
automatically recognizes the paper width and the
paper surface and offers them for selection in the
print menus.
See also Defining surfaces and Defining paper
settings in Register 4.
New paper width 114 mm
In the future there will be a new paper magazine,
in which the paper width 114 mm is included. This
magazine is fully compatible with the old one, i.e.
if paper size 114 is not used no changes on the
d-lab are required.
If the paper width 114 mm is to be used, the
magazine code of another paper width must be
used since only 16 different combinations are
possible altogether.
Example: 82 mm.
In this case the width 82 mm can no longer be
used.
Modification:
– In configurations with width 82 delete the width:
Settings – d-lab settings – Paper settings
– Under New save the old magazine code for
width 82 as code for 114 and create
configurations with paper width 114 mm (cut
length 171 mm).
AGFA d-lab.3
2003-06-01 /PN 9008
Production
6.5
Advertisement
Table of Contents
