Table of Contents
Advertisement
Operation
Cleaning the chemical filters
Purpose:
To ensure uniform circulation of the processing
solutions by regular cleaning of the filters.
− Clean chemical filters:
− Remove them 1x per week and clean with
warm water and a brush.
− Put the chemical filters back in the color-
marked order.
See also Changing the chemical filters
Cleaning the densitometer calibration plate
Purpose:
To ensure optimum calibration of the
Densitometer.
− Open the flap above the Paper Processor
dryer
− Use a coin to open the screws on the
densitometer unit
− Fold away the densitometer unit and clean
the calibration plate with a humid cloth
Warning!
Running machine:
Mind mobile parts inside the densitometer unit
when cleaning the calibration plate!
Caution!
Damaged calibration plates must be replaced by
a technician.
AGFA d-lab.3
Maintenance
2003-06-01 /PN 9008
202B039
dlabr069
8.17
Advertisement
Table of Contents
