Table of Contents
Advertisement
Operation
Sheet transfer (ST), removing paper dust
Vacuum cleaner, brush Isopropanol / water
− Remove the cover
− Slacken the locking screw (1, red)
− Pull out the ST
− Remove the paper dust with a vacuum cleaner.
− Clean the rollers and transport belts with a lint-
free cloth.
− Mount the unit again
− ighten the locking screw and mount the cover
again
Make sure that the transport belts are not shifted.
AGFA d-lab.3
Maintenance
2003-06-01 /PN 9008
dlabr332
8.13
Advertisement
Table of Contents
