Table of Contents
Advertisement
Production
Buttons in the preview with 4 images and in the
enlarged view:
– Change PpF
Change the number of prints per frame
– Image editing and Special
These functions can be called up in several
print modes. To avoid repetition, they will be
explained elsewhere.
– Hold
All corrections etc. – except the enlarged view -
are kept for all other prints of the order up to
the next modification. This operation requires a
lot of time because all images shown in the
preview are recalculated and refreshed.
– Print & Stop
The current frame is printed. It remains marked
so that other modifications and further prints
can be made.
– Autoprint (after Stop)
The current image is printed and disappears
from the display. The preview continues.
– Skip
The current image is not printed and is not
shown any more. The next image moves in
from the left.
– Preview off
Changing to Autoprint without preview is
possible while an order is running. The preview
disappears; the remaining images of the order
are printed with the preset configuration.
See Special and Image editing in all print modes
with preview later on in this register.
6.30
2003-06-01 /PN 9008
Operation
010
AGFA d-lab.3
Advertisement
Table of Contents
