Table of Contents
Advertisement
Operation
Buttons in the preview with 4 images and in the
enlarged view:
– Change PpF
Change the number of prints per frame
– Image editing and Special
These functions can be called up in several
print modes. To avoid repetition, they will be
explained elsewhere.
– Print & Stop
The current frame is printed. It remains marked
so that other modifications and further prints
can be made.
– Autoprint (after Stop)
The current image is printed and disappears
from the display. The preview continues.
– Skip
The current image is not printed and is not
shown any more. A new image moves into the
preview.
– Preview off
Changing to Autoprint without preview is
possible while an order is running. The preview
disappears; the remaining images are printed
with the preset configuration.
See Special and Image editing in all print modes
with preview later on in this register.
Orders with more than 40 prints:
The sorter automatically moves to the next bucket
after 40 prints. When removing the prints make
sure that they are distributed in several buckets!
AGFA d-lab.3
2003-06-01 /PN 9008
Production
046
6.49
Advertisement
Table of Contents
