Reorder; Reorder List - AGFA d-lab.3 Technical Documentation Manual

Production

Reorder

Reorder is only possible for:
– Films / film strips with extended DX code
– Color negatives 135 and APS films films
– But not in B/W mode

Reorder list

– Call up:
Print mode

Reorder

– Activate / deactivate Preview
– Edit order
The operator creates a list for each order that
contains the numbers of the reordered frames;
either on the Touch Screen or via the optional
Reorder keyboard:
Film size
135
IX240
− Enter the negative number with PpF (prints
per frame), the corrections and the
configuration: The field PpF of the reorder
list shows --. Internally this is understood
as 1. Input is only required if more than
one print has been ordered.
− Select Index print, Autosave, and Back
print for the order as these settings are
ignored in the selected order configuration.
The selection boxes show the settings of
the configuration entered for the first print.
− Complete the input of a list with OK.
Every time the reorder list is opened it shows the
standard configuration even if the configuration
was modified for the previous order.
6.32
2003-06-01 /PN 9008
No. of lists
max. 2
unlimited if the FID is indicated
Operation
095
011
AGFA d-lab.3