Table of Contents
Advertisement
Operation
Default Setting of Maximum Densities and Calibration Factors
Default setting for maximum densities:
DMax red
DMax green
DMax blue
Default settings for calibration factors:
Calibr.fact. red
Calibr.fact. green
Calibr.fact. blue
The default settings have been optimized for the
use of Agfa papers and Agfa chemicals. Therefore
we recommend to leave these values unchanged
if Agfa paper and Agfa chemicals are used.
If paper and/or chemicals of other manufacturers
are used, the settings can be changed to improve
the calibration for these papers and/or chemicals
and thus improve the quality of the production.
See Defining new maximum densities for a paper
and Change color detection of the internal
densitometer in this chapter.
The specified densities refer to measuring results
with the internal densitometer. On the external
densitometer the measuring values may be
different.
AGFA d-lab.3
= 2.4
= 2.3
= 2.15
= 1.03
= 1
= 0.98
2003-06-01 /PN 9008
Tests
5.9
Advertisement
Table of Contents
