Table of Contents
Advertisement
Operation
Info and Help
Call-up in every screen with
− This screen shows the operating hours of the
scanner lamp and the laser. The counter for the
operating hours of the scanner lamp can be
reset in the menu Test / Maintenance.
− For all other information, always a separate
screen is called up:
− Film drive, Printer and Paper Processor
called up by touching the module in the
figure.
− Order Info, Version Info, Error list
called up by touching the buttons with the
respective names.
− To call up information, touch the desired button
or the module in the figure.
− Close the info screen by touching Back.
In case of an error, the module concerned is
shown in red:
− Touch the button on the module to localize the
error more precisely:
The defective component is shown in red in the
next screen.
AGFA d-lab.3
i
in the info field:
2003-06-01 /PN 9008
Overview
052
067_red
2.29
Advertisement
Table of Contents
