Tfs Density - AGFA d-lab.3 Technical Documentation Manual

Settings

TFS density

Every parameter is assigned to a certain subject
category for which selective density corrections
can be defined.
Standard setting:
Step width:
Parameters Function
DL 1 Flash shots (flash portraits in front of a dark background)
DL 2 High-contrast backlight, snow, or beach shots, landscapes with large
parts of a bright sky
DL 3 Low-contrast snow shots, gray water surface with an overcast sky,
hazy visibility etc.
DL 4 Persons with white clothes (e.g. wedding dress) on a green meadow,
view through trees, flowers with a green background etc.
DL 5 Subjects with a high percentage of blue
Lower values produce lighter prints, higher values
produce darker prints in the respective group.
The basic setting for all density parameters is 1.0
and it should not be modified.
Any modification of the standard values does not
only result in an improvement in one group, but
also in a deterioration in another group.
4.42
2003-06-01 /PN 9008
1.0
0.1
Operation
100
Setting
range
0.0 – 2.0
0.0 – 2.0
0.0 – 1.4
0.0 – 2.0
0.0 – 1.4
AGFA d-lab.3