Table of Contents
Advertisement
Operation
Indexprints in the Different Print Modes
Indexprints are printed automatically at the end of
the order if this has been specified in the
configuration.
Autoprint without preview:
All negatives are shown on the indexprint with the
corrections of the configuration in use.
Autoprint with preview:
All scanned negatives, not only the printed ones,
are shown on the indexprint with the corrections
used for the first print. Additional manual
corrections are not taken into consideration.
Each negative appears only once on the
indexprint, even if it was printed in several
versions.
Reorder:
All scanned images appear once on the
indexprint. The layout defined in the configuration
for the first image is used as the standard. This
setting can be modified.
Package:
All scanned images, are included, but only once.
File print:
All files of the order are included.
Network order from Workstations:
If an indexprint is specified in the descriptive order
file, it is printed with all files of the order.
Indexprints are not possible with Manual
positioning.
Print Indexprint Only
2 alternatives:
– Set the number of prints for the order on zero
– Modify the configuration accordingly.
AGFA d-lab.3
2003-06-01 /PN 9008
Production
6.63
Advertisement
Table of Contents
