Table of Contents
Advertisement
Overview
Automatic Switch-On (Timer)
To start the d-lab automatically via the timer, the
following prerequisites must be met:
− In the Machine settings (Startup settings and
Edit calendar) enter start times for the work
days and define free days.
− The d-lab is switched off by the End of work
function.
− Do not switch off the main breaker afterwards.
To set the workdays and the start times see
Startup: Defining the Start Time / Default Login,
Register 4.
For the End of work function see Switch-off in this
Register.
System Start
After manual or automatic switch-on the solutions
and the dryer are heated up.
Displays during this phase:
1. Progress of the startup / heating up in per cent
2. Remaining time until the machine is ready to
operate
3. Error messages, if any
4. Stop button to shut down the whole machine in
the correct way
The d-lab is ready to operate after the solutions
and the dryer have reached the set temperatures.
2.8
2003-06-01 /PN 9008
Operation
033
AGFA d-lab.3
Advertisement
Table of Contents
