Table of Contents
Advertisement
Operation
The Workstation can send orders at any time. The
time when the order is to be printed is specified in
the Machine settings:
– automatic or
– manual (operator-controlled)
Refer to the following paragraphs Start, operator-
controlled and Start, automatic.
If the order is aborted due to an error, such as e.g.
paper jam, it must be started again. The order
continues where it was aborted before.
Start, Operator-Controlled
The operator starts the printing of network orders.
– Call up:
Print mode
Network orders
The screen shows an overview of the waiting
orders in chronological order. Marking the
oldest order is standard.
The operator can alter the order of handling by
selecting a different order in the list. It is
possible to mark several orders at the same
time.
– Mark an order
– Start Print
AGFA d-lab.3
2003-06-01 /PN 9008
Production
043
6.59
Advertisement
Table of Contents
