Table of Contents
Advertisement
Production
Order Number (Automatic / Manual)
Order numbers are allocated either automatically
or manually, see Machine settings / Further
settings in Register 4.
Manual order number:
The first order always starts with 1.
An order number is displayed for every print
screen. The number can be changed:
– As long as the Change? button is shown under
the order number.
– Until a film (film strip) is pulled in (Autoprint /
Reorder)
– Until the first print / slide has been calculated
(Manual positioning / Slide print)
– Until Start print with/without preview is pressed
(load image data from data carrier).
The operator enters a number. If it exists already,
an inquiry comes up whether to overwrite the
order. The entered number is incremented for the
following orders.
Automatic order number:
The first order always starts with 1.
The entered number is automatically incremented
for the following orders. It cannot be changed.
6.12
2003-06-01 /PN 9008
Operation
600
AGFA d-lab.3
Advertisement
Table of Contents
