Table of Contents
Advertisement
Operation
Impact (for color negatives and digital)
Changes in the correction effect (only influences
the color and density regulators):
Presetting:
–
Range:
–
The presetting of 100 should result in a correction
density step of about 0.01D and a color step of
about 0.03D-0.04D on the paper (always
depending on the paper gradation). The
parameter changes are linear: 50 halves, 200
doubles the effect.
Basic setting of the machine to modify the
colors/density for the whole production: It is
effective for all color/density corrections, i.e. in all
screens with regulators for yellow, magenta, cyan
and density. These corrections do not show in the
back print.
Recommendation:
The correction effect should only be changed once
in order to adjust the fine grading or the extent of
the correction to personal requirements.
Seasonal changes (color dominants green and
white) should not be compensated by the
correction effect, but only by the corrections
themselves.
Shifting all 3 colors by the same extent and in the
same direction has no effect.
AGFA d-lab.3
100%
10-200%
2003-06-01 /PN 9008
Settings
103
079
4.33
Advertisement
Table of Contents
