Table of Contents
Advertisement
Deviations from normal Operation
Push ON (Reset key) when
− the whole machine has to be initialised, e.g.
when a Stop does not show any effect
− the selected actions are not carried out (lock-
up)
− an undefined operating status has occurred
Do not pull out the film mask during a Reset!
The data base is saved automatically prior to a
Reset. After the Reset the machine starts up
again and loads the last consistent Backup.
The customer does not lose data, the machine is
in the same status as it was before the ON key
was pressed.
7.4
2003-06-01 /PN 9008
Operation
AGFA d-lab.3
Advertisement
Table of Contents
