Table of Contents
Advertisement
Tests
− Enter in the next screen:
− Emulsion no. (only for information, not
assessed)
− Tolerance: Step width 0.1 mm
Possible input of the manually measured
deviation of the paper from the coded width
(useful for border prints).
− Activate / deactivate with Laser point
− If necessary, enter the desired maximum
densities (DMax red, DMax green, DMax
blue) or accept the default settings.
The settings will only be effective if the option
"with laser point" is activated.
If necessary enter the desired calibration
-
factor (Calibr.fact. red, Calibr.fact. green,
Calibr.fact. blue) or accept the default
settings.
- Start
Start the PBL
See Default Setting of Maximum Densities and
Calibration Factors, Defining the Maximum
Densities for a New Paper as well as Changing
the Color Detection of the Internal Densitometer in
this chapter
5.8
2003-06-01 /PN 9008
Operation
097
AGFA d-lab.3
Advertisement
Table of Contents
