Table of Contents
Advertisement
Production
Autoprint
– Call up:
Print mode
Autoprint
Displayed are:
− Standard configuration for the inserted film
carrier
− Order number
– Possible operator actions:
− Display configuration
− Change of the configuration (for the order):
− Touch the indicated configuration and
select a different configuration from the
list, or
− Touch Change configuration and
change the settings.
− Change the order number
– Activate / deactivate Preview
Autoprint without Preview
This is the simplest print mode with the highest
throughput.
– Preview is deactivated
– Inserting a film / film strip:
It is pulled in and scanned, positioned on the
first negative and printed.
While the order is being processed, the bottom
part of the screen shows information about the
configuration as well as the status:
− Frame number of the printed negative
− Number of the prints already processed
− FID number (for films IX240)
– At the same time, the operator can prepare the
next order (see upper part of the screen), or
switch to the Reorder mode to enter a reorder
list.
It is not possible to switch to Autoprint with
preview while an order is running.
6.28
2003-06-01 /PN 9008
Operation
009
AGFA d-lab.3
Advertisement
Table of Contents
