Table of Contents
Advertisement
Operation
– The Reorder screen is displayed.
For IX240 films, it is checked whether a list
exists already for the entered FID:
− If not, the list is saved.
− If a list exists already for the FID, a pop-up
window appears offering the functions:
Overwrite and Cancel (change FID)
– As long as no film strip has been inserted for
the current order, the following actions are
possible:
− Edit order
The screen with the reorder keyboard is
displayed. Correct the list, OK
− Change order number
– Insert the films / film strips one after the other:
All data important for the order is shown on the
screen.
– In Reorder mode without preview, printing runs
automatically. If the preview function is active,
the operator can stop the preview to edit the
original.
– While the current order is running, the following
operations are possible:
− Delete remaining
DX numbers of the reorder list not yet
prescanned are shown in the field Frame.
The current order remains active until all
numbers have been scanned and printed.
Delete remaining can be used to stop it
before.
− Enter the list for the next order
– If the order consists of several film strips, insert
all film strips one after the other, edit the
images and print them.
– End of order is set automatically after all DX
numbers of the reorder list have been found
and printed. Then the reorder screen appears
again.
AGFA d-lab.3
2003-06-01 /PN 9008
Production
095
6.33
Advertisement
Table of Contents
