Installing And Setting Up An Orbital Shaking Station - Agilent Technologies Bravo Platform User Manual

A Accessories and platepads

Installing and setting up an Orbital Shaking Station

Installing and setting up an Orbital Shaking Station
Description
Setup workflow
106
The Orbital Shaking Station is a microplate shaker that can be installed at any deck
location on top of a short adapter pad instead of a platepad. The Orbital Shaking Station
has the option of using its own control module, or an Inheco Single TEC controller (STC)
or Multi TEC controller (MTC). For a full description of the Orbital Shaking Station, see
the manufacturer's documentation.
Figure
Orbital Shaking Station with its own control module and an adapter pad
Step Procedure
1 Install the Orbital Shaking Station.
2 Configure the station in Diagnostics.
3 Test the station operation.
4 Edit the teachpoint using the pipettor
teach plate. Be sure to consider the 10-
mm thickness of the teach plate when
you edit the teachpoint.
See...
"Installing the Orbital Shaking
Station" on page 107
"Configuring the Orbital Shaking
Station in Bravo Diagnostics" on
page 110
"Testing the Orbital Shaking
Station" on page 111
"Adjusting the teachpoint using
a teach plate" on page 113
Bravo Platform User Guide