Table of Contents
Advertisement
2 Setting up the Bravo Platform
Configuring external robot access
Related information
Configuring external robot access
About external robot access options
46
3
In the Labware list, select the name of the labware type you are using.
4
Select the location for the move:
a
In the Location A list, select the current deck location of the labware.
b
In the Location B list, select the deck location to which the labware will move.
5
Set the Speed to Slow.
6
Click Pick A -> B to pick up the microplate from deck location A and place it on deck
location B. Click Pick B -> A to pick up the microplate from deck location B and place
it on deck location A.
7
Repeat steps 4 and 6 for the remaining deck locations where the gripper will be
transferring labware.
8
Set the Speed to Fast, and repeat steps 4, 6, and 7.
9
Make sure that the gripper holds the microplate securely and keeps it level while
moving the microplate from location to location.
For information about...
The workflow this procedure belongs
to
Opening Diagnostics
Gripper tab
Setting teachpoints
Reporting problems
For a Bravo Platform that is integrated in a system with other plate-handling robots, you
can configure one of the following features:
See...
"Workflow for setting up the Bravo
Platform" on page 16
"Opening Bravo Diagnostics" on page 24
"Gripper tab quick reference" on page 236
"Setting teachpoints" on page 34
"Reporting problems" on page 87
Bravo Platform User Guide
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
