Table of Contents
Advertisement
A Accessories and platepads
Installing and configuring a Magnetic Bead Accessory
IMPORTANT
Related information
146
7
In the Jog/Teach tab image of the Bravo deck, click the accessory Location.
8
In the Approach height above teachpoint list, select 2 mm, and then click Approach.
The Bravo head moves to the deck location and moves down so that the pipette tip
is approximately 2 mm above the Magnetic Bead Accessory.
9
Verify that the pipette tips are centered above the magnet rings in the x- and y-axes.
If necessary, adjust the x- and y-axes at this point, and then jog the head down by
2 mm to the teachpoint z-axis and click Teach.
10
In the Profiles tab, click Update this profile to save the changes.
Verify the this accessory teachpoint for your microplate type using a full set of tips. For
guidance, contact Agilent Automation Solutions Technical Support.
For information about...
Bravo Platform hardware components
Editing teachpoints
See...
"Hardware overview" on page 5
"Setting teachpoints" on page 34
Bravo Platform User Guide
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
