Bravo Accessories Overview - Agilent Technologies Bravo Platform User Manual

A Accessories and platepads

Bravo accessories overview

Bravo accessories overview
Description
104
You can add accessories to the Bravo Platform to enhance existing functions and
facilitate operation. The accessories and platepads include:
Accessory Description
Alignment Station Positions 1536-well microplates for
precise pipetting and ST tip boxes
for precise tips-on operations.
The Alignment Station can also be
used for 384-well microplates.
Autofilling Consists of the following:
accessories
•
•
•
Barcode Reader Consists of a platepad with a
barcode reader and a mirror that
can be installed in place of a
platepad at any deck location.
Lid hotel (delidding Enables you to configure a platepad
option in in the software to accept a lid in a
Diagnostics) delidding process. You use
Diagnostics to configure this option.
Filter Plate Holder Provides a location for a filter plate
while awaiting assembly of the
Vacuum Filtration Station and when
disassembling the station.
Heating Shaking Provides heating and fluid mixing
Station across a microplate. The station
(Teleshake 95) uses the Inheco Single TEC Control
(STC) or Multi TEC Control (MTC).
Light Curtain Pauses or stops the operation if the
operator reaches into the Bravo
Platform during a run.
Magnetic Bead Designed to separate smaller
Accessory volumes (up to 350 µL).
Pump Module
Auto Filling Reservoir, Tip Wash
Station, or Open Wash Tray
Weigh Station (optional)
See...
"Installing and
configuring a platepad
or Alignment Station"
on page 140
"Autofilling
accessories" on
page 175.
"Setting up the
Barcode Reader" on
page 185
"Configuring a
platepad for delidding"
on page 139
"Setting up a Trash or
Filter Plate Holder
accessory" on
page 134
"Installing a Heating
Shaking Station" on
page 156
G5562A, G5563A Bravo
Platform Safety and
Installation Guide
"Installing and
configuring a Magnetic
Bead Accessory" on
page 143
Bravo Platform User Guide