Agilent Technologies Bravo Platform User Manual page 80

Bravo Platform User Guide
Figure
Installing a head in the Bravo head mount
Note: If you do not hear the pins snap into place, check that the straight
edges of the retainer pins are in the vertical position, as the following figure
shows. Attempt to rotate the pins to ensure that they are in the locked
position. The pins should not rotate freely.
Figure
Installed Bravo 96AM Head: (
2
6
To lock the head, rotate the head lock clockwise until it reaches its hard stop.
This ensures that the head is fully seated and does not shift position during
operation.
4 Maintenance and troubleshooting
Changing the Bravo head
1 2
) retainer pin and ( ) head lock
1
69