Component Descriptions And Options - Agilent Technologies Bravo Platform User Manual

Component descriptions and options

Bravo Platform User Guide
Step For this task...
4 In the VWorks Labware Editor, ensure
that the labware definitions are
correct for the filter and collection
plates that will be placed on the
Vacuum Filtration Station during a
protocol run.
Set the microplate parameters and
the Bravo gripper offset for the
labware.
5 In the VWorks software, add one or
more pairs of the vacuum assembly
and disassembly tasks in the protocol.
The Vacuum Filtration Station applies vacuum to filter the contents of microplates
placed on the station. The station consists of a collar and a manifold base that can be
assembled and disassembled automatically. The following figure shows the primary
components.
A Accessories and platepads
Installing and setting up a Vacuum Filtration Station
See...
VWorks Automation Control Setup
Guide
VWorks Automation Control User
Guide
115