Installing And Connecting The Orbital Shaking Station - Agilent Technologies AssayMAP Bravo Installation Manual

Installing the platform

Installing and connecting the Orbital Shaking Station

Connecting the STC controller
Installing and connecting the Orbital Shaking Station
26
The following figure shows the Inheco STC Controller.
Figure STC Controller front and rear views
C P CP CP CP C P A AC A C AC AC AC C
2 2 2 1 21 21 21 21 .5 .5 5 5 5 5 5 ° ° C °C °C °C C
10 10 10 1 1 0 0 0 00rp 00 00 0 0 0 rp rp rp rp rp p m m m m m
For details on the STC Controller, see the Inheco user documentation.
To connect the STC Controller:
1
Connect the STC Controller to the computer using the provided USB cable.
2
Connect the STC Controller power cable to an AC outlet.
3
Set the controller power switch to the On (|) position.
The following figure shows the Orbital Shaking Station, which has its own
control module.
Figure Orbital Shaking Station with control module and adapter pad
USB
ID
ext.
Sensor
AssayMAP Bravo Platform Installation Guide