A Accessories and platepads
Installing and setting up an Orbital Shaking Station
Related information
112
2
Type the RPM, select the Stir direction, and then click Start.
3
At the Orbital Shaking Station on the deck, verify that the accessory operates
correctly.
4
In the Bravo Accessory Diagnostics dialog box, click Stop, and then click OK.
For information about...
Bravo Platform hardware components
Adjusting the teachpoint
Using the accessory in a protocol
See...
"Hardware overview" on page 5
"Using the teach plate to set the
teachpoint for an accessory" on page 113
VWorks Automation Control User Guide
Bravo Platform User Guide