Agilent Technologies Bravo Platform User Manual page 194

Bravo Platform User Guide
4
In the Accessory Diagnostics dialog box, click the second tab.
5
At the Bravo Platform, place the reservoir on the Weigh Station. Make sure the
reservoir is empty.
6
In the Accessory Diagnostics dialog box, click Set Tare to configure the empty
setting.
7
To configure the full setting for the reservoir:
a
Fill the reservoir to the desired full level.
You can use the Pump Reagent command on the Processes tab to fill or drain
the reservoir.
B Autofilling accessories
Setting up a Weigh Station
183