Accessories And Platepads - Agilent Technologies Bravo Platform User Manual

A Accessories and platepads
This chapter describes the accessories platepads that can be used with the Bravo
Platform and provides the installation and removal procedures.
This chapter contains the following topics:
•
"Bravo accessories overview" on page 104
•
"Installing and setting up an Orbital Shaking Station" on page 106
•
"Using the teach plate to set the teachpoint for an accessory" on page 113
•
"Installing and setting up a Vacuum Filtration Station" on page 114
•
"Setting up a Trash or Filter Plate Holder accessory" on page 134
•
"Configuring a platepad for delidding" on page 139
•
"Installing and configuring a platepad or Alignment Station" on page 140
•
"Installing and configuring a Magnetic Bead Accessory" on page 143
•
"Installing and setting up a Nested Rack Insert" on page 147
•
"Using the Manual Fill Reservoir" on page 150
•
"Setting up the Thermal Station (cooling pad)" on page 151
•
"Installing a Heating Shaking Station" on page 156
•
"Setting up thermal and shaking stations (Inheco controller)" on page 159
•
"Installing and configuring the Peltier Thermal Station" on page 166
•
"(Bravo SRT only) Setting up an LT tip box location" on page 172
For details on how to set up accessories on the AssayMAP Bravo Platform, see the
AssayMAP Bravo Platform Installation Guide.
103