Agilent Technologies Bravo Platform User Manual page 116

Related information
Bravo Platform User Guide
Accessory Description
Manual Fill Supplies reagents to 96- and 384-tip
Reservoir heads.
This reservoir requires manual
refilling and emptying.
Peltier Thermal Uses Peltier technology to provide
Station (CPAC temperature control uniformly
Ultraflat) across a microplate. The station
uses the Inheco Single TEC Control
(STC) or Multi TEC Control (MTC).
Nested Rack Insert Provides stability for a stack of
nested tip boxes to ensure precision
during a tips-on process.
Orbital Shaking Mixes labware contents using a
Station shaking motion.
SRT platepad for Enables tips on and tips off tasks
250-µL tip boxes using the 250-µL tip box on the
shorter SRT Bravo Platform.
Thermal Station Uses a fluid-filled thermal block to
(chiller) provide temperature control
uniformly across a microplate.
Trash location Installs in a deck location 4 or 6
cutout to provide through-deck
access to a trash container
underneath the deck.
Vacuum Filtration Uses vacuum to filter the contents
Station of a microplate.
For information about...
Pipette heads
AssayMAP Bravo Platform
Setting up liquid and labware
definitions
Using an accessory in a protocol
A Accessories and platepads
Bravo accessories overview
See...
"Using the Manual Fill
Reservoir" on page 150
"Installing and
configuring the Peltier
Thermal Station" on
page 166
"Installing and setting
up a Nested Rack
Insert" on page 147
"Installing and setting
up an Orbital Shaking
Station" on page 106
"(Bravo SRT only)
Setting up an LT tip
box location" on
page 172
"Setting up the
Thermal Station
(cooling pad)" on
page 151
"Setting up a Trash or
Filter Plate Holder
accessory" on
page 134
"Installing and setting
up a Vacuum Filtration
Station" on page 114
See...
"Liquid-handling heads" on page 11
"AssayMAP Bravo Platform" on page 197
VWorks Automation Control Setup Guide
VWorks Automation Control User Guide
105