Mazda CX-9 Grand Touring 2009 Manual page 1583

49 G033 105
Outer diameter: 39-48 mm {1.6-1.8 in}
49 B025 004
Outer diameter: 54-63 mm {2.2-2.4 in}
Fig. 17: Pressing Wheel Hub Installation Position
Courtesy of MAZDA MOTORS CORP.
LOCKNUT INSTALLATION NOTE
1. Install a new locknut and stake it as shown.
Fig. 18: Tapping Locknut
Courtesy of MAZDA MOTORS CORP.
FRONT WHEEL HUB BOLT REPLACEMENT
1. Remove the brake calliper component from the steering knuckle and suspend it out of the way using a
cable.
2. Remove the disc plate.
3. Tap the dust cover (the part shown in the figure) with a chisel lightly and bend the processing point back
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE Front Axle - Mazda CX-9