Mazda CX-9 Grand Touring 2009 Manual page 1849

2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
6. Adjust the SST (plum-bob) so that it is aligned with the center of the brand emblem, determine the center
position at the rear of the vehicle, and mark the center position on the floor surface.
NOTE:
7. Position the leveling line over the marked positions at the front and rear of the vehicle, and then mark the
position on the floor surface 1,470 mm ± 8 mm {57.87 in ± 0.3 in} from the vehicle rear.
CAUTION:
NOTE:
Use a commercially-available leveling line.
2008 Mazda CX-9 Grand Touring
Fig. 26: Identifying Center Of Brand Emblem
Courtesy of MAZDA MOTORS CORP.
The center of the brand emblem indicates the center position at the
front of the vehicle.
A commercially-available plum-bob (weight: 150 g {5.29 oz}) can be
substituted for the SST.
Fig. 27: Identifying Center Position Of Vehicle (Rear)
Courtesy of MAZDA MOTORS CORP.
If the center position at the vehicle rear is set first, the leveling
line could be misaligned. Determine the center position at the
vehicle front first, then set the center position at the vehicle
rear.